The MesseCode Playbook closes each of its seven levels with a block on typical mistakes. The collection grew over twenty-five years and more than eight hundred trade fair projects. We are passing it on here, with one review question per level to go with it.
The seven levels lead to the participation concept, the written foundation of a trade fair appearance. It is not a stand concept, a graphics concept or a creative concept. Those are built from it. How the levels build on each other is set out in Developing a trade fair strategy.
A mistake almost never shows up where it is made. It shows up two or three levels later, as a symptom, and that is where it gets treated. This is why so much can be repaired on a trade fair stand without the result getting any better. Once you know the seven places, you find the mistake where it was made and correct it in an afternoon instead of a rebuild.
Level 1, Goals: the mistake that shifts everything after it
The typical mistakes at this level:
- All goals are treated as equally important.
- Goals are left deliberately vague to avoid conflict.
- Responsibility is not clearly assigned.
- Goals are quietly changed later on.
- The consequences of the goals are not taken into account.
The second one carries the most weight, and it is almost always well meant. A vague goal offends nobody. Management, sales, marketing and product management can all agree on it because each reads something different into it.
The effect appears much later. At the stand, nobody can say which conversation was a good one. In the follow-up, the criterion for sorting leads is missing. And in the discussion about the next participation, four people are once again talking about four different trade fairs. What a solid goal looks like is set out in Defining trade fair objectives.
The review question from the Playbook: If you were allowed to name a single figure after the fair to say whether it was worth it, which one would that be?
Level 2, Company and market role: the role you wish you had
- The wished-for role replaces the real market position.
- The self-image goes unchallenged.
- Competitors are underestimated or ignored.
- The company role stays too general (“We are innovative.”).
A trade fair is a field test of your own market role. Visitors may well know an exhibitor's weaknesses too, and they compare them directly with the neighbouring stand.
Acting from a role the market does not confirm creates a tension that carries into every later level. The argumentation sounds interchangeable because it claims a position the visitor does not recognise. The stand design looks strained. And the stand team notices first, because they field the questions.
Between self-image and outside perception sits a third factor that is often overlooked. What does your material actually say? Website, brochure and presentation are neither one nor the other. They are what you send out, they are often older than your current position, and the visitor reads them before arriving at the stand. More on this in Company and market role.
The review question: A competitor adopts your role description word for word. Would anyone notice?
Level 3, Product and service logic: completeness
- The entire portfolio goes on show (“We do not want to leave anything out.”).
- Internal interests override strategic prioritisation.
- New products are automatically given priority.
- Complexity is mistaken for competence.
The fourth point is the one least talked about. Many exhibitors show a lot because they are afraid of looking small otherwise. The effect is the opposite. A visitor who sees eight topics at once files none of them.
The bill arrives at level 6. An overloaded floor forces every touchpoint to do several jobs at once, and a touchpoint meant to do everything usually does none of it.
A product that stays off the floor usually sharpens the profile of the whole appearance. Which selection holds up is set out in Which products belong on the trade fair stand.
The review question: Which offering is on your list because a colleague insists on it, rather than because it serves your goal?
Level 4, Ideal customers and decision-maker roles: all of them at once
- The ideal customer definition is faulty.
- Needs are asserted instead of derived.
- All decision-maker roles are addressed at the same time.
Address everyone and you end up addressing nobody in particular. In practice this is the most expensive decision at this level, because it feels like caution.
The mistake travels. At level 5 it produces one argumentation for everyone that holds for nobody. At level 7 it produces an invitation that contradicts nobody and means nobody.
There is a flip side that is almost always missing. How does your stand team recognise, mid-conversation, that it is not talking to one of your target roles? Without that exclusion criterion, every conversation costs the same amount of time. How a usable profile comes about is set out in Who is your ideal customer at a trade fair.
The review question: Name three real companies that fit your ideal customer profile. If you cannot think of three, the profile is too abstract or too narrow.
Level 5, Argumentation architecture: features instead of benefits
- Features are confused with benefits.
- Benefits stay too general (“more efficient”, “better”, “more innovative”).
- Proof of trust is missing or stays implicit.
- Every decision-maker role gets the same argumentation.
- Too many lines of argument dilute the core message.
A benefit is not the same for every decision-maker role. What a technical director sees as a gain in efficiency means risk reduction to the management board. The same property, two different reasons.
If working through it produces no clear benefit, the cause is almost always at level 4, in the decision-maker role or the product. The work belongs back there rather than in another round of copywriting. How a chain is built is set out in Value argumentation at the trade fair.
The review question: Which of your benefits could a competitor claim word for word? What is then left that is yours?
Level 6, Touchpoint logic at the stand: habit and self-purpose
- Exhibits are shown out of habit or because of internal interests.
- Technology and interaction become an end in themselves.
- Every touchpoint is meant to do everything.
- Arguments are replaced by machines.
- Design is mistaken for function.
The most common sentence at this level is that something was there last time as well. The second most common describes a means instead of a requirement. “Put up a big screen” is a means. “A visitor has to be able to see for himself, in under two minutes, that …” is a requirement, and it produces solutions nobody in the building would have thought of.
Then there is the second job of every touchpoint, which is almost always forgotten. It has to work for the people standing in front of it and be tellable by the people who were not there. A visitor leaves, and at some point somebody asks what he saw. What he says then is your positioning. Not what was written on your wall. Which touchpoints have a job is set out in Touchpoints at the trade fair stand.
The review question: Your floor space is a third smaller. What would go first, and why is it on there now?
Level 7, Visitor Journey: covering up contradictions
- New creative ideas get developed.
- Everything is treated the same.
- Contradictions are covered up.
- Strategy and execution get mixed together.
Nothing new is invented at this level. This is where everything is brought together, and that is exactly why every earlier mistake comes to light here.
The third point is the decisive one. If two levels do not fit together as you bring them together, that is not a defeat. It is the actual purpose of this level. Cover the contradiction up here and you take it into execution, where it becomes expensive. How the visitor's path comes about is set out in The visitor journey.
The review question: Work back through the seven levels. Where did you have to invent something so that it would fit? That is where your gap is.
Where the mistake is made and where it shows up
The table shows why treating symptoms on the stand so rarely helps. The numbers in brackets are the levels of the MesseCode.
| The mistake is made here | It shows up here |
|---|---|
| Goals stay vague (1) | Nobody can say which conversation was a good one (6 and 7) |
| Wished-for role instead of market position (2) | The argumentation sounds interchangeable (5) |
| The entire portfolio goes on show (3) | The floor is overloaded, every touchpoint is meant to do everything (6) |
| All decision-maker roles at once (4) | One argumentation for everyone, one invitation for nobody (5 and 7) |
| Features instead of benefits (5) | An exhibit that shows something instead of proving something (6) |
| Touchpoints out of habit (6) | The invitation promises something the stand does not deliver (7) |
| Contradictions are covered up (7) | Execution multiplies the ambiguity |
That leads to an uncomfortable way of working. Before repairing anything on the stand, ask which level the problem came from. The answer is often three levels further back, and there the correction costs an afternoon instead of a rebuild.
The seventy per cent trap
Working through these seven levels almost always leaves something open. Target groups are not cleanly prioritised, the argumentation is not yet consistent, the stand logic is not yet thought through as a function.
That is not a problem. The problem begins when you move into full execution with only seventy per cent clarity.
Strategy doesn't work at seventy per cent. It works as a system.
Go into one hundred per cent execution with seventy per cent clarity, and you will pay for it. Not always straight away. But inevitably.
Strategic ambiguity does not disappear through good design. It multiplies in execution, and that is where it becomes expensive. This is why going back to an earlier level is almost always worth more than trying to rescue the result later on.
And one more observation that makes the work easier for many people. Strategy is not linear. But it is systematic. Anyone who looks at their goals again after working on the argumentation usually formulates them more sharply than the first time.
What you can do now
Take your last trade fair appearance and work through the seven review questions from this article. Most of them are answered in two minutes. On one or two you will get stuck, and that is exactly their purpose. Where you get stuck, the level is not finished.
How solid your decisions are overall is shown by the Strategy Test in a few minutes, with no sign-up. The full method, with every mistake, all forty-two reflection questions and the tasks for each level, is in the MesseCode Playbook.
Or you go through the levels once with somebody who has been doing this for twenty-five years. In a strategy call, thirty minutes, no obligation.
FAQ: mistakes in trade fair strategy
What are the most common mistakes in trade fair preparation?
Vaguely worded goals, a company role the market does not confirm, too broad a product offering on the floor, addressing all decision-maker roles at the same time, features instead of benefits in the argumentation, touchpoints out of habit, and covering up contradictions when everything is brought together.
Why does a mistake in trade fair strategy often show up late?
Because the levels build on each other. A vague goal does no visible damage at its own level. It surfaces where a decision has to be made that refers back to that goal, which means at the stand and in the follow-up.
What is the seventy per cent trap?
The attempt to move into one hundred per cent execution with seventy per cent clarity. Strategic ambiguity does not disappear through good design, it multiplies in execution. The figure describes the degree of clarity of the strategy and not a proportion of exhibitors.
How do I know my company role is too general?
Two tests. Describe your role in one sentence without the words “innovative”, “leading”, “partner” and “solution”. And ask yourself which trade fair you would be wrong at with exactly that description. If none comes to mind, it is too general.
Should you show more or fewer products at a trade fair?
Fewer, provided the selection is justified. A trade fair stand is not a product catalogue. The floor is for the offerings that carry the primary goal and credibly support the chosen role. A product that stays off the floor usually sharpens the profile of the whole appearance.
What does it mean if two levels do not fit together?
That the method is working. Bringing everything together at the last level has exactly the job of making contradictions visible. Cover the contradiction up there and you take it into execution.